Development and validation of the first brazilian french-based asphalt mix complex modulus and fatigue test apparatus

Autores

  • Breno Barra Universidade Federal de Santa Catarina
  • Leto Momm Federal University of Santa Catarina (UFSC)
  • Yader Guerrero Federal University of Santa Catarina (UFSC)
  • Yves Brosseaud French Institute of Transportation Sciences and Technologies, Development and Road Network – IFSTTAR, Nantes, France
  • Gustavo Momm Petróleo Brasileiro S.A. – PETROBRÁS

DOI:

https://doi.org/10.14295/transportes.v28i2.1927

Palavras-chave:

Validation, Complex Modulus, Fatigue, Test Apparatus.

Resumo

The main aim of this paper is to present the development and validation procedures of the first brazilian french-based asphalt mix complex modulus and fatigue test apparatus, so-called FADECOM, in order to demonstrate the effective application of the results obtained in pavement design procedures. Magnetic sensitive Hall Effect non-contact captors determine amplitude displacement, while loading cells capture force amplitude by a diaphragm system. Independent cooling and heating chambers assure a precise temperature control comprising a range from -30ºC to above 100ºC with an accuracy of 0.1ºC. A frequency inverter controls the emission of pulses usually set from 1Hz to 30Hz. For validating the apparatus, a scientific cooperation agreement was dealt with French Institute of Transportation Sciences and Technologies, Development and Road Network (IFSTTAR), in which specimen samples were tested in both UFSC and IFSTTAR laboratories. The crossed-results obtained indicate an excellent performance and accuracy of FADECOM apparatus, presenting variations around just 3 microstrains in determining fatigue strains at 106 cycles (e6) and less than 10% related to the complex stiffness modulus, demonstrating huge accuracy of the FADECOM apparatus and its practical feasibility to be applied in pavement design procedures, based on the technical principles of French methodology.

Downloads

Não há dados estatísticos.

Biografia do Autor

Breno Barra, Universidade Federal de Santa Catarina

Post-Graduation Program in Engineering and Mechanical Sciences (Pós-ECM)

Federal University of Santa Catarina (UFSC)

Technological Center of Joinville (CTJ), Campus Joinville.

Leto Momm, Federal University of Santa Catarina (UFSC)

Post-Graduation Program in Engineering and Mechanical Sciences (Pós-ECM)

Federal University of Santa Catarina (UFSC)

Technological Center of Joinville (CTJ), Campus Joinville.

Yader Guerrero, Federal University of Santa Catarina (UFSC)

Post-Graduation Program in Engineering and Mechanical Sciences (Pós-ECM)

Federal University of Santa Catarina (UFSC)

Technological Center of Joinville (CTJ), Campus Joinville.

Yves Brosseaud, French Institute of Transportation Sciences and Technologies, Development and Road Network – IFSTTAR, Nantes, France

French Institute of Transportation Sciences and Technologies, Development and Road Network – IFSTTAR, Nantes, France

Gustavo Momm, Petróleo Brasileiro S.A. – PETROBRÁS

Equipment Engineering Department, Santos/SP

Referências

AFNOR NF EN 12697-24 (2012) Mélanges Bitumineux: Méthode d’Éssai pour Mélange Hydrocarboné à Chaud - Partie 24: Essai par Flexion à Flèche Constante. 32p. Association Française de Normalisation. France.

AFNOR NF EN 12697-26 (2012) Mélanges Bitumineux: Méthode d’Éssai pour Mélange Hydrocarboné à Chaud - Partie 26: Module de Rigidité. 40p. Association Française de Normalisation. France.

Barra, B.; Momm, L.; Guerrero, Y.; Al-Qureshi, H. A.; Mikowski, A.; Michels, R. (2016) Temperature implications on rheological-mechanical behavior and design of high modulus dense asphalt mix. Construction & Building Materials, v. 125, p. 135-144, 2016. DOI: 10.1016/j.conbuildmat.2016.08.037.

Barra, B.; Momm, L.; Guerrero, Y.; Bernucci, L. L. B. (2012) Fatigue Behavior of Dense Asphalt Mixes in Dry and Environmen-tal-Conditioning States. Construction & Building Materials, v. 29, p. 128-134. DOI: 10.1016/j.conbuildmat.2011.10.003.

Barra, B. (2009) Avaliação da Ação da Água no Módulo Complexo e na Fadiga de Misturas Asfálticas Densas. PhD Thesis presented to Federal University of Santa Catarina (UFSC), 327p.

Catalogue LCPC/SETRA (1994) Catalogue des Structures Types de Chaussées Neuves: Réseau Routière National. Laboratoire Central des Ponts et Chaussées (LCPC) en partenariat avec le Service d’Étude Technique des Routes et Autoroutes (SETRA). Paris, France.

Domec, V. (2005) Endommagement par fatigue des enrobés bitumineux em condition de trafic simulé et de température. Thèse de Docteur. Université de Bordeaux I. 426p.

Guide Technique (1997), French Design Manual for Pavement Structures (English Version). Published by Service d’Études Techniques des Routes et Autoroutes (SETRA) and Laboratoire Central des Ponts et Chaussées (LCPC), 248 p. Paris, France.

Huet, C. (1963) Étude par une méthode d’impédance du comportement viscoélastique des materiaux hydrocarbonés. Thèse de Docteur. Faculté des Sciences de l’Université de Paris. 58p.

Manuel LPC (2007) Manuel LPC d’aide à la formulation des enrobés. Groupe de Travail RST “Formulation des enrobés”. 320p. Laboratoire Central des Ponts et Chaussées. Paris, France.

Momm, L. (1998) Estudo dos Efeitos da Granulometria Sobre a Macrotextura Superficial do Concreto Asfáltico e Seu Comportamento Mecânico. PhD Thesis presented to Polytecnhical School of University of São Paulo (USP), 357p.

Rudensky, A. V. (1997) Asphalt concrete fatigue properties, in Proceedings of the 5th International RILEM Symposium. Mechanical Tests for Bituminous Materials (MBTM): Recent Improvements and Future Prospects. Lyon, France, pp. 1058-1066.

Sayegh, G. (1965) Contribution à l’étude des propriètés viscoélastiques des bitumes purs et des bétons bitumineux. Thèse de Docteur Ingénieur. Faculté des Sciences de Paris. 206p.

Downloads

Publicado

15-05-2020

Como Citar

Barra, B., Momm, L., Guerrero, Y., Brosseaud, Y., & Momm, G. (2020). Development and validation of the first brazilian french-based asphalt mix complex modulus and fatigue test apparatus. TRANSPORTES, 28(2), 41–53. https://doi.org/10.14295/transportes.v28i2.1927